Ligne de production de tuyaux de pression et de gaz en HDPE

Ø16-Ø1600

GAMME DE TUYAUX (mm)

0.5-40

PORTAGE MAXIMAL (m/min)

53-71

LONGUEUR DE LIGNE (m)

300-1400

SORTIE MAXIMALE (kg/h)

Ligne de production de tuyaux de pression et de gaz en HDPE

Ø16-Ø1600

GAMME DE TUYAUX (mm)

0.5-40

PORTAGE MAXIMAL (m/min)

53-71

LONGUEUR DE LIGNE (m)

300-1400

SORTIE MAXIMALE (kg/h)

Product Advantage

  • L'extrudeuse est équipée d'une vis à grand rapport L/D et d'un servomoteur synchrone à aimant permanent spécial pour réaliser une production élevée et des économies d'énergie.

  • The die body adopts spiral structure and exhaust mechanism to ensure stable melt temperature and reduce cooling length.

  • Adopt swarfless cutting mechanism, clear and accurate fixed length, beautiful incision.

  • Equipped with online straight pipe, coil automatic packing mechanism, efficient and labour saving.

  • Production data acquisition and analysis system can be selected to realize transparent production management.

  • L'extrudeuse est équipée d'une vis à grand rapport L/D et d'un servomoteur synchrone à aimant permanent spécial pour réaliser une production élevée et des économies d'énergie.

  • The die body adopts spiral structure and exhaust mechanism to ensure stable melt temperature and reduce cooling length.

  • Adopt swarfless cutting mechanism, clear and accurate fixed length, beautiful incision.

  • Equipped with online straight pipe, coil automatic packing mechanism, efficient and labour saving.

  • Production data acquisition and analysis system can be selected to realize transparent production management.

Extruder

The whole series of extruder adopt 40 large L/D ratio high output screw, spiral bushing, high output, low melt temperature, good plasticizing performance, and the screw has very linear extrusion performance.
Equipped with special permanent magnet synchronous servo motor + gearbox imported from Taiwan, energy saving, low noise and installation space saving.
The electric control system can integrate the data-based information system into one, with good user experience.

Mould Design

The die body adopts spiral structure, which is suitable for extrusion of pipes in various pressure ranges. Internal air-cooled die is used for large-size die, which can save 20% of cooling length, fast internal cooling and remarkable energy-saving effect.

Mould Design

The die body adopts spiral structure, which is suitable for extrusion of pipes in various pressure ranges. Internal air-cooled die is used for large-size die, which can save 20% of cooling length, fast internal cooling and remarkable energy-saving effect.

Vacuum Tank

All vacuum of the whole line adopts negative pressure closed-loop automatic adjustment of vacuum degree, stable pressure, improve the quality of pipe production, low noise, energy saving 30 ~ 60%.

Vacuum Tank

All vacuum of the whole line adopts negative pressure closed-loop automatic adjustment of vacuum degree, stable pressure, improve the quality of pipe production, low noise, energy saving 30 ~ 60%.

Haul-off Unit

The whole series of haul-off unit adopts the scheme of "one drive more" independent permanent magnet synchronous servo motor for each caterpillar, which can ensure a stable large speed range of more than 50 times, and can simultaneously meet the requirements of fast hauling of small-sized pipe and and low hauling speed of large-size thick wall pipe, with stable speed and strict synchronization of each caterpillar.

Haul-off Unit

The whole series of haul-off unit adopts the scheme of "one drive more" independent permanent magnet synchronous servo motor for each caterpillar, which can ensure a stable large speed range of more than 50 times, and can simultaneously meet the requirements of fast hauling of small-sized pipe and and low hauling speed of large-size thick wall pipe, with stable speed and strict synchronization of each caterpillar.

Cutter

Single or double blade swarfless cutting, stable cutting, can cut thin pipe, especially thick pipe.
Electric cam control cutting cart, fixed length precisely, cutting stable.

Cutter

Single or double blade swarfless cutting, stable cutting, can cut thin pipe, especially thick pipe.
Electric cam control cutting cart, fixed length precisely, cutting stable.

Technical Data

  • Model
  • PIPE RANGE(mm)
  • EXTRUDER MODEL
  • MAX OUTPUT(kg/h)
  • MAX HAULING SPEED(m/min)
  • TOTAL INSTALLED POWER(kw)
  • LINE LENGTH(m)

* Test et acceptation basés sur la formule standard de Liansu

ÉCHANTILLON

DEMANDER LE MEILLEUR PRIX

contact US